Alpine MRX-V60

The Alpine X-Power MRX-M100 uses much of the same digital technology as the PDX series, achieving high efficiency with excellent audio performance, including low distortion, high damping factor and high S/N ratio. PDX digital technology means high efficiency, so the X-Power amps are up to 29% more compact than previous models, making installation even more convenient.

Speaker Level Inputs let you connect these amps directly to factory-installed head units that do not have preamp outputs, so you can upgrade the original system with higher power and better speakers. The remote sensing function turns the power on automatically when the amp detects an incoming audio signal. There is no more need for an extra remote line.

These digital powerhouses are so efficient, they’re much more compact than you expect. Advanced thermal protection means you can play them loud and the music never stops.

• 1200W Max Power
• 4 x 50W RMS @ 4ohms + 1 x 300W @ 2ohms
  
• Class-D (Digital)
• Thermal Management Control

Power Output Ratings

• Max Power: 1200W
• RMS Per Channel into 4ohms, 14.4V (=1%THD+N): 4 x 50W + 200W
• RMS Per Channel into 2ohms, 14.4V (=1%THD+N): 4 x 75W + 300W
• RMS Bridged into 4ohms, 14.4V (=1%THD+N): 2 x 150W

Sound Tuning

• Crossover Frequency (LPF): 50 - 400Hz (-12dB/oct.) for Subwoofer
• Crossover Frequency (HPF): 50 - 400Hz (-12dB/oct.) for CH-1/2/3/4
• EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
• Subsonic: OFF / 5 - 30Hz (-24dB/oct.)

Dimensions

• Heat Sink: 210 x 58 x 230 mm
• Footprint: 270 x 58 x 230 mm   

General

• Amplifier Type: Class-D (Digital)
• Channel Design: 4 Channel + Subwoofer
• Thermal Control: Thermal Management Control
• Power Supply: MOSFET
• Power Supply Design: DC-DC PWM Power Supply
• Board Circuitry: S.T.A.R. Circuitry
• Current Protection: Over-Current, Over-Voltage and Thermal Protection
• Power Indicator: Top Mounted Blue LED Power Indicator
• 4-Channel Speaker Level Input
• Crossover: Variable Lowpass & Highpass Filter
• Built-in Bass EQ
• Built-in Subsonic Filter
• Final Outputs: Direct FET
• Board Design: 6-layer Glass Epoxy PC Board
• Continuously Adjustable Gain Control
• Remote Bass Control ( RUX-KNOB sold separately )
• Power Requirements: 14.4V DC (11 - 16V)
• Input Sensitivity (RCA Input): 0.2 - 4.0V
• Input Sensitivity (Speaker Level Input): 0.5 - 10V
• Input Impedance:10k ohms
• Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 5Hz - 45kHz
• Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 5 - 400Hz
• Frequency Response (+0, -1dB: 1W into 4 ohms) for CH-1/2/3/4: 7Hz - 30kHz
• Frequency Response (+0, -1dB: 1W into 4 ohms) for Subwoofer: 10Hz - 300Hz
• THD+N (10W into 4 ohms) for CH-1/2/3/4: 0.02%
• THD+N (10W into 4 ohms) for Subwoofer: 0.008%
• THD+N (Rated Power into 4 ohms) for CH-1/2/3/4: 0.07%
• THD+N (Rated Power into 4 ohms) for Subwoofer: 0.04%
• Damping Factor for CH-1/2/3/4:500
• Damping Factor for Subwoofer:1000
• Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 103dB
• Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 107dB
• Remote Level: 0 to -20dB ( RUX-KNOB Required )