Brax eXvibration Pro Anti Noise Paste 5 kg

Brax eXvibration Anti Noise Paste is designed to minimise road noise, eliminate panel resonance and suppress vibrations. It is extremely flexible and easy to apply due to its high glass fibre content and can be applied to a wide range of surfaces including metalwork, door cards, trim and bass boxes.

eXvibration paste is best applied using a brush or spatula, but can also be applied with a suitable spray gun and compressor. The product is solvent free, non flammable, virtually odorless and typically dries within 8 hours.

This 5kg tub will provide enough anti noise paste to typically treat 4 car doors and/or critical floor areas. (approx 30-40 sq/ft 2mm thickness)

Key Benefits

• Minimises road noise, eliminates resonances, suppresses vibrations
• Extremely flexible due to high glass fibre component
• Can be applied to all surfaces
• Use with Brush, Spatula or Brax Compressor Gun
• Resealable for storage
• Solvent free

More Detail

• Virtually odorless
• Non-flammable
• High Glass fibre content, resulting in high surface stability
• Very rough finished surface for sound refraction
• Can be applied heavily with a spatula or brush in a single pass 2-3mm, with the spray gun 5-7mm
• Fast drying time at 20 degrees approx 8-12 hours (heat speeds up the drying process considerably)
• Impermeable to air therefore very good when treating bass box wood (MDF) panels - helps seal an enclosure.
• Heat-resistant, will not peel or lose adhesion in vehicle areas exposed to heat.