JL Audio XD700/5v2 5 Channel Class D Full Range High End Speaker Subwoofer Amplifier
Silent Coat 40 Sheet 2MM Sound Deadening Damping Material Matt Bulk Pack
JL Audio XD300/1v2 300W Subwoofer Bass Amplifier
This ultra-compact monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in the tightest space applications, including motorcycles and ATV’s (in a weather-tight compartment).
This ultra-compact monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in the tightest space applications, including motorcycles and ATV’s (in a weather-tight compartment).
Targeted specifically for subwoofer applications, the XD300/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. The XD300/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
Description: Monoblock Subwoofer Amplifier
Rated Power: 300W RMS x 1 @ 2 ohm
Rated Power: 200W RMS x 1 @ 4 ohms
Inputs: Differential-balanced with RCA jack inputs
On-board Crossover: Sallen-Key, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
Preamp Output: Buffered pass-through type
Dual mono speaker output connections: Accept up to 12 AWG wire
+12V and Ground connections: Accept up to 4 AWG wire
THD at Rated Power: 1% @ 2 ohm
S/N Ratio: >100 dB referred to rated power
(A-weighted, 20 Hz-20 kHz noise bandwidth)
>80 dB referred to 1W
(A-weighted, 20 Hz-20 kHz noise bandwidth)
Frequency Response: 10 Hz - 1KHz (+0, -1dB)
Damping Factor: >120 @ 4 ohms / 50 Hz
>60 @ 2 ohms / 50 Hz
Input Range: 100mV - 4V RMS
Dimensions (L x W x H): 6.85 in. x 7.09 in. x 2.05 in.