JL Audio 13W7AE Anniversary Edition - Subwoofer

JL Audio 13W7AE 500W 13" 32cm Anniversary Edition Subwoofer Bass Driver

JL Audio 13W3v3-2

JL Audio 13W3v3-2 600W 13" 32cm Subwoofer Bass Driver

JL Audio 13W3v3-4 600W 13" 32cm Subwoofer Bass Driver

JL Audio 13W3v3-4 JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Clearly the best sounding 13W3's yet, these subwoofers feature DMA-optimized,
£449.00

W3v3 13.5-inch Subwoofer Driver (600 W, 4 Ω)

If you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels.

As with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability.

The 13W3v3-4 is best used with amplifier power in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

JL Audio 13W3v3 JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Clearly the best sounding 13W3's yet, these subwoofers feature DMA-optimized, long linear excursion capability to minimize distortion and increase output. 13W3's are superb performers in compact sealed or ported enclosures.

Multiple patented technologies enhance performance and reliability. As with JL Audio's flagship drivers, development was guided by JL Audio's proprietary DMA (Dynamic Motor Analysis) modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope.

A mineral-filled polypropylene upper cone body with a metallic JL Audio logo medallion provides a classy new look, while a removable (and customizable) mounting flange trim ring receives grille-mesh inserts directly, without the need for additional grille hardware. (Grille mesh inserts are sold separately.)

  • RMS Watts - 600 W
  • Recommended RMS Amplifier Power - 150 - 600 W
  • Nominal Impedance - 4 Ω
  • 13.5" Subwoofer
  • Dual 4 Ohms
  • Mineral-filled polypropylene cone
  • Nitrile-butylene rubber surround
  • Frequency response: 20-200 Hz
  • Sensitivity: 87.9 dB
  • Top-mount depth: 7-5/8"
  • Sealed box volume: 1.5 cubic feet
  • Ported box volume: 2.25 cubic feet

Table_Image

  • Nominal Diameter - 13.5 in / 345 mm
  • Overall Diameter (A) - 14.0 in / 356 mm
  • Mounting Hole Diameter (B) - 12.5625 in / 319 mm
  • Bolt Hole Circle (C) - 13.2 in / 335 mm
  • Magnet Diameter (D) - 5.79 in / 147 mm
  • Mounting Depth (E) - 7.63 in / 194 mm
Additional Information
type N/A
manufacturer_part_number N/A