PowerBass STA-8 8" 300W Compact Active Under Seat Amplified Bass Enclosure

The STA-8 features a Class A/B mono amplifier perfectly matched to power the 8-inch woofer in its vented enclosure design. We developed a compact trapezoid shaped enclosure, perfectly tuned to get the most out of the proprietary 8-inch subwoofer. The geometric design maximises transient response, reducing the negative effects that a small enclosure can have on the subwoofer by dispersing and dissipating standing waves away from the subwoofer and result in cleaner, deeper bass in less space.

Supplied with “plug in” connectors for speakers and power, installation is simple and straightforward. The addition of dual mounting straps means the STA-8 can easily be taken out of the vehicle when extra space is needed. Also, since no holes need to be cut, the STA-8 is a perfect choice for leased vehicles that could use a little extra bass.

STA-8 Amplified Sub Enclosure Features:

Aluminium Enclosure with a lighted logo badge all CAD (Computer Aided Design) for maximum output in small spaces.

8-inch Polypropylene Woofer with 40oz ferrite magnet and pole venting.

150 watts RMS Mono Amplifier (300 watts Peak Music Power) featuring variable Gain, Low Pass and Bass EQ.

High / Low Input compatible with OEM or aftermarket radios.

Variable Remote Gain Control (Included).

Specifications:

• Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminium Enclosure with Dynamic Damping
• 8” Injection Moulded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 150-Watt High Efficiency Class A/B Design
• Output Power (14.4 V) @ 2 ohm: 150 watts RMS/300 watts max
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Frequency Response: 20 Hz - 250 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 9.75"W x 2.75"H x 13.5"D