Rockford Fosgate PM1000X1bd Punch Marine 1,000 Watt Class-bd Mono Amplifier

With its super efficient Class-bd circuit topology, the PM1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

• High level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• RCA pass-thru outputs
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Infrasonic filter
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware

Specifications:

• CEA-2006 Compliant
• CEA-2006 Power Rating 300Wx1 @ 4Ω ≤1.0% THD+N
• Number of Channels:  1

Rated Power  (RMS Continuous Power):

• 300 Watts x 1 @ 4-Ohm
• 500 Watts x 1 @ 2-Ohm
• 1000 Watts x 1 @ 1-Ohm
• Total Power  (Sum of Rated Power):  1000 Watts

Dynamic Power  (PVC/PowerCube®):

• 491 Watts x 1 @ 4-Ohms
• 874 Watts x 1 @ 2-Ohms
• 1430 Watts x 1 @ 1-Ohm

• Bridgeable:  No
• Frequency Response: 20Hz - 250kHz +/- 1.0dB
• Efficiency (average):  86% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise):  4-Ohm:<1.0%, 2-Ohm:<1.0%, 1-Ohm:<1.0%

Crossover Controls:

• Low-Pass (LP): 50-250Hz @ 12dB/octave 
• Butterworth 
• Infrasonic Filter (IF): 28Hz @ 12dB/Octave 
• Butterworth 
• All-Pass: No

Tone Controls:

• Punch EQ2 Bass: 0dB to +18dB @ 45Hz

Input Sensitivity:

• 150 mV - 12 V

Signal Input:

• Hi/Low level: 1 RCA pair

Signal Output:

• Hi/Low level: 1 RCA pair

Power Input Connector:

• Captive C-Clamp

Power Wire Guage:

• 4 AWG

Speaker Output Connector:

• Captive C-Clamp

Speaker Wire Gauge:

• 8 AWG to 18 AWG

Heat Sink Type:

• Cast Aluminum

Cooling:

• Convection

Visual Indicators:

Power/Protect/Thermal LED 

• Input Clip LED3 
• Output Clip LED1,2,3

LED Color Legend:

• 1BLUE: <0.5% THD 
• 2VIOLET: 1% THD 
• 3RED: 10%+ THD

Circuit topology Class:

• Class-BD

Operating Voltage:

• 9 - 16 VDC

Recommended Fuse:

• 140 A

 Max. Current Draw (13.8V Sinewave):

• 130 A
  

Average Current Draw (13.8V Music):

• 65 A 

Suggested Alternator:

• 100 A
  

Shipping Weight:

• 12.9 Lbs. (5.85 Kg.)

Dimensions (H x W x D):

• 2.38 x 7.76 x 13.28 (in) 
  6.05 x 19.71 x 33.73 (cm)