JL Audio 12W6v3-D4 600W 12" 30cm Subwoofer Bass Driver
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the JL Audio 12W6v3 is your ultimate ally. This highly advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior.
Regular Price
£999.00
Special Price
£899.10
W6v3 12-inch Subwoofer Driver (600 W, dual 4 Ω voice coils)
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space. Detailed enclosure recommendations can be found in the "Specifications" tab.
Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch subwoofer driver, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v2 as a 2 Ω or 8 Ω driver.
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the JL Audio 12W6v3 is your ultimate ally. This highly advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The JL Audio 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 litre) of air space.
Greater excursion capability and higher power handling allow for higher output. Dual 4 ohm voice coils permit deploying the W6v3 as a 2 ohm or 8 ohm driver.
- RMS Watts - 600W
- Recommended RMS Amplifier Power - 200 - 600 W
- Nominal Impedance - Dual 4 Ω
- 12" subwoofer with dual 4-ohm voice coils
- Mineral-filled polypropylene cone with rubber surround
- Satin black cast-alloy basket
- Frequency response: 20-200 Hz
- Sensitivity: 85.4 dB
- Top-mount depth: 7-9/16"
- Sealed box volume: 1.0 cubic feet
- Ported box volume: 1.3 cubic feet
- Nominal Diameter - 12.0 in / 300 mm
- Overall Diameter (A) - 12.5 in / 318 mm
- Mounting Hole Diameter (B) - 11.02 in / 280 mm
- Bolt Hole Circle (C) - 11.86 in / 301 mm
- Magnet Diameter (D) - 7.0 in / 178 mm
- Mounting Depth (E) - 7.52 in / 191 mm
| type | N/A |
|---|---|
| manufacturer_part_number | N/A |