JL Audio Evolution C2-525 (130 mm) 2-Way Component Speaker System
JL Audio Evolution C2-525 For a car speaker to excel it must be thoroughly engineered in all areas. The C2-525 woofer design must deliver sufficient efficiency, smooth mid-range response and good low-.....
Regular Price
£329.00
Special Price
£296.10
JL Audio Evolution C2-525 For a car speaker to excel it must be thoroughly engineered in all areas. The C2-525 woofer design must deliver sufficient efficiency, smooth mid-range response and good low-frequency extension. The tweeter must be smooth off-axis, exhibit good extension and be non-fatiguing, while the crossover design must seamlessly blend the sound of the drivers so that the end result is clean, realistic audio performance.
In designing the new C2-525 Coaxial and Component Systems, JL Audio have drawn from their vast experience in woofer design as well as the tweeter technologies employed in their world-class C5 component systems. The resulting products deliver a compelling performance solution at a price within reach of any enthusiast seeking a great listening experience.
All JL Audio models include removeable front-loading protective grilles with a striking new design that combines black steel mesh with satin silver accents. Electroformed logo nameplates can be positioned on the grilles or elsewhere in the vehicle, according to the needs of the installation.
General Specifications:
- Continuous Power Handling (RMS) 60 W
- Peak Music Power 225 W
- Recommended RMS Amplifier Power (per Ch.) 15 - 100 W
- System Efficiency 89.0 dB @ 1 W / 1 m
- System Nominal Impedance 4 Ω
- System Frequency Response 63 Hz - 22 KHz ± 3 dB
Woofer Physical Specifications:
- Injection-molded, Mica-filled, Polypropylene Cone, Butyl Rubber Surround
- 1 in. Voice Coil on Kapton® Former
- Flat, Symmetrical Roll Spider
- Ferrite Magnet
- Frame Outer Diameter* (A) 5.20 in / 132 mm
- Grille Tray Outer Diameter (B) 6.01 in / 153 mm
- Magnet Outer Diameter (C) 2.76 in / 70 mm
- Frontal Coaxial Tweeter Protrusion (D) N/A
- Frontal Grille Protrusion** (E) 0.72 in / 18 mm
- Mounting Hole Diameter (F) 4.56 in / 116 mm
- Mounting Depth (G) 2.50 in / 64 mm
**Frontal grille protrusion measured from mounting surface
Tweeter Physical Specifications:
- 0.75 in. (19 mm) Silk Dome
- Ferrofluid Cooling / Damping
- Neodymium Magnet
- Flush Mount Fixture Diameter (A1) 1.87 in / 48 mm
- Surface Mount Fixture Diameter (A2) 1.69 in / 43 mm
- Flush Mount Mounting Hole Diameter (B) 1.625 in / 41 mm
- Flush Mount Mounting Depth (C) 0.76 in / 19 mm
- Flush Mount Tweeter Frontal Protrusion (D1) 0.29 in / 7 mm
- Surface Mount Tweeter Frontal Protrusion (D2) 0.92 in / 23 mm
Crossover Physical Specifications:
- 1st Order Low_pass Filter
- 2nd Order High-Pass Filter
- 3 Position Adjustable Tweeter Level
- Premium Mylar Capacitors
- Premium Air-Core Inductors
- Width (W) 3.36 in / 85 mm
- Height (H) 1.44 in / 37 mm
- Depth (D) 4.72 in / 120 mm
| type | N/A |
|---|---|
| manufacturer_part_number | N/A |
