The DBA 201 active subwoofer box features a double passive radiator enclosure made with solid MDF and optimized with FEM simulation to ensure superior performance, maximizing the subwoofer output. The massive magnet of the 8-in. driver provides optimal control during the highest cone excursion.
Extra full set of controls to fine-tune the in-car performance
The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.
Auto turn-on and standby mode
The built-in audio sense circuit allows the DBA 201 to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.
Features:
High performance in a compact stylish design
440-watt peak Class D amplifier
Compatible with every car audio system
Plug & Play connection
Extra full set of controls to fine-tune the in-car performance
Auto turn-on and standby mode
Provided remote-level control
Specifications:
Size mm (in.) - 200 (8)
Power Handling - Continuous W - 220
Power Handling - Peak W - 440
Impedance Ohm - 0.4
Design - Active subwoofer box with double passive radiators
Voice Coil Ø - 38.6 (1.52) mm (in.)
Frequency Response Hz - 32 ÷ 400
Magnet size D x d x h mm (in.) - 115 x 47 x 25 (4.5 x 1.8 x 0.98)
Weight of one component kg (lb.) - 6.7 (10.54)
Magnet - High Density Flux Ferrite
Cone - Pressed paper
Voice Coil Type - Copper
Operating voltage VDC (Fuse) - 6.5 ÷ 18 (15A)
Start - Stop voltage VDC - 6
Idling current A (Power OFF) - 260 m (1 m)
Consumption @ 14,4 VDC Max musical power A - 8.5
Remote IN Turn on VDC (Current) - 4 (1 mA)
PRE input signal Turn ON VRMS - 10 mV
SPK input DC Turn ON VDC - 2
Distortion - THD @ 100 Hz % - 0.15
Bandwidth Hz - 15 - 150
S/N ratio dBA - 100
Output power (RMS) @ 14,4 VDC, 1% THD W - 220
PRE input signal VRMS (impedance) - 0.2 ÷ 5 (10kΩ)
SPK input signal VRMS (impedance) - 1.2 ÷ 30 (6Ω)
LO-PASS Filter @ 24 dB Oct adjustable Hz - 50 ÷ 150
Subsonic Filter @ 24 dB Oct Fixed Hz - 15
Phase switch - 0 / 180°
Bass Boost @45 Hz dB - 0 ÷ 6
Sub remote volume control dB - 0 ÷ -15 (HRC 01 included)