JL Audio CP110-W0v3 Subwoofer & Kenwood X-Series X502-1 Amplifier Package Deal with Line Output Converter

Car Audio Direct - Custom JL Audio CP110-W0v3 Subwoofer & Kenwood X-Series X502-1 Amplifier Package Deal with Line Output Converter

Enclosed Subwoofer System with Single 10WØv3-4 Subwoofer Driver, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure

This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.

The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.

This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth.
Construction: MDF

Recommended amplifier power: 75 - 300W RMS

Having a ported enclosure allows the subwoofer system to take advantage of the work being done by the rear of the woofer cone to reinforce the low-frequency response. The resonant characteristics of the column of air in a port, when installed in a given box, are adjusted by altering its resistance to motion, which is accomplished by changing the dimensions of the port. So in theory, ported subwoofers typically offer better low-end extension as well as greater output around their tuning point.


Advantages - Efficient, low distortion around port tuning, extended and intense bass

General Specifications:

• Continuous Power Handling (RMS) 300 W
• System Nominal Impedance 4 Ω
• Enclosure Type Slot-ported
• Finish Gray carpet
• Grille Included No
• External Width (W) 15.51 in / 394 mm
• External Height (H) 13.77 in / 350 mm
• External Depth (D1) 17.38 in / 441 mm
• Net Weight 29 lb / 13.15 kg

Kenwood X-Series X502-1 500 Watt Class D Mono Channel Subwoofer Amplifier

Ultra-high grade range amplifiers and speakers that deliver high density realistic sound and a spatial sound impression. The new X-Series amplifiers are precisely designed for High-Resolution Audio to create a truly authentic listening experience with every detail and nuance.

Key Features

• Mono channel digital power amplifier
• D-class Amplifier
• Compact chassis
• Built-in low pass filter
• Speaker Level Input
• Signal sensing Turn-on
• Extruded aluminum heat sink design
• 2 ohms load capability
• Screw-type terminals

Amplifier Features

• Class D Amplifier
• Full Range Digital Amplifier
• Load Capability 2Ω Stable
• Rated power output (4Ω) 300W x 1 (4Ω)
• Rated power output 500W x 1 (2Ω)
• CEA-2006 Compliant
• Low-pass Filter
• Switched Mode Power supply , with Power MOS-FET
• Single Side Terminals
• Die-Cast Aluminium Heat Sink

Amplifier-Specifications

• Rated power output (4Ω, 14,4V) 300W x 1 (20Hz ~ 200Hz, 1%THD)
• Rated power output (2Ω, 14,4V) 500W x 1 (100Hz, 1%THD)
• Rated power output (CEA-2006) 300Watts RMS x 1 at 4 ohms and 1% THD
• Low-pass Filter 50~200Hz (-24dB/oct)
• Bass Boost Circuit 40Hz, 18dB (B-Channel)
• RCA Input Sensitivity 0.2 ~ 5V
• Input Impedance 10kΩ
• Signal to Noise Ratio 100dB
• Signal to noise ratio (CEA-2006) 85dBa (Reference: 1 Watt into 4 Ohms)
• Frequency response (+0dB, -1dB) 20Hz ~ 200Hz
• Operating voltage 14.4V (11V ～ 16V allowable)
• Maximum current consumption 25A
• Installation Size (WxHxD) 213 x 53 x 149 (mm)
• Weight 1.5kg

Stinger SSK8 8 AWG 600W Amplifier Wiring Kit

Featuring Ultra Flexible CCA cable construction for excellent current transfer to power hungry amplifiers on a budget. Quality twisted pair interconnects for noise free signal transfer. Also includes ultra-flexible speaker wire, remote turn-on, MIDI high current fuse holder and ring terminals for a complete installation package. All the necessary parts for installing your next 2 channel/mono amplifier. Additional RCA’s required for 4 or more channels.

Includes:

• 17FT Matte Blue Ultra Flexible Power Wire (CCA)
• 3FT Matte Gray Ultra Flexible Ground Wire (CCA)
• 17FT Twisted Pair RCA Interconnects (OFC)
• 17FT Blue Remote Turn-on Wire (CCA)
• 20FT Matte Blue Ultra Flexible Speaker Wire (CCA)
• 1pc. High Current Water-resistant MIDI Fuse holder with 60A Fuse 

AudioControl LC2i - 2 Channel Line Output Convertor with Main and Subwoofer Output

The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers.  It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls.

Features

• Two channels of Active speaker level inputs – Accept 400 watt signals per channel
• Fixed and variable outputs with discrete level controls
• AccuBASS® processing for correction of bass roll-off
• GTOTM Signal Sensing
• Input For Optional Remote Level Control
• Compact design

Inputs

• Speaker Level Input: 1 (2 channels)
• Maximum Speaker Level Input: 400W per channel at 4Ω
• Input Impedance: 20kΩ

Outputs

• Preamp Outputs: 2 (2 channels main, 2 channels bass)
• Maximum Output Level: 9.5Vrms/13V peak
• Output Impedance: 150Ω

Performance

• Total Harmonic Distortion: 0.01%
• Signal to Noise: >110 dB
• Frequency Response: 33 Hz – 22 kHz ±1 dB

Control

• Remote In
• 12VDC Remote Out (always active when unit is on)

General

• Current Draw: 150mA
• Recommended Fuse Rating: 1A

Weights & Dimensions

• Dimensions: 5.4″L x 3.25″D x 1.5″H (6.5″L including mounting brackets)
• Weight: 1.0lbs (0.5kg)