The X700 dash cam from Thinkware brings you 1080p Full HD Crystal Clear footage and is packed full of advanced features.
Keep your car protected at all times with Advanced Parking Mode, Timelapse Mode and Energy Saving Mode
With a 2.7″ full IPS colour touchscreen allows ease of access to everyone at any angle or time of day, allowing you to view footage, or play with the settings without having to remove the SD card
The X700 dash cam from Thinkware brings you 1080p Full HD Crystal Clear footage and is packed full of advanced features.
Keep your car protected at all times with Advanced Parking Mode, Timelapse Mode and Energy Saving Mode
With a 2.7″ full IPS colour touchscreen allows ease of access to everyone at any angle or time of day, allowing you to view footage, or play with the settings without having to remove the SD card
Touchscreen
Conveniently adjust settings or review footage with the X700’s 2.7” LCD touchscreen.
The touchscreen features an IPS panel that makes viewing easy from any angle and at any time of the day.
High Definition Video Quality
Sony Starvis Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.
The 140° wide angle lens view will minimize blind spots to assure recording of all events without fail.
Parking Surveillance Mode
Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.
Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality
Motion Detection
Monitor and capture any motion around the vehicle for potential vandalism attempts.
Impact Detection
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.
Time Lapse Parking Mode
Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.
Energy Saving Mode
Reduce power consumption and provides longer video recording than normal parking mode. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.
Super Night Vision
Whilst in parking mode the Thinkware camera uses advancements in lens and computing power to revolutionise night time recording with their Trademarked Super Night Vision.
The system uses ISP (Image Signal Processing) technology and real-time image processing to capture far greater detail at night, further protecting your vehicle whilst parked.
Wide Dynamic Range
Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.
Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.
Night-Time Quality Correction
Most videos recorded on a dashcam in the dark are generally difficult to make out details. That is why this dashcam uses enhanced sensors that come with a standard function of brightness and colour control as well as noise cancellation. These increase the quality of the image and ensure your videos are always the best quality possible.
Multiple Recording Modes
CONTINUOUS RECORDING MODE
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
INCIDENT RECORDING MODE
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
MANUAL RECORDING MODE
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
FAIL-SAFE RECORDING
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.
What's In The Box:
type | N/A |
---|---|
manufacturer_part_number | N/A |