Thinkware F100 1080P Front & 720P Rear Dashcam, 16GB, GPS

The F100 dash cam from Thinkware brings you clean and crystal clear 1080p Full HD footage with a wide-angle view so you never miss anything with your camera.

Packed full of features and optional extras, it’s the perfect camera for the tech-savvy driver.

Featuring Parking Mode, using G-Sensor and motion detection to protect your vehicle when hardwired.

Along with nighttime quality correction to ensure your footage is the best quality no matter what time it is.

What's In the Box:

• F100 1080P Dash Cam
• 1080P Rear Camera
• GPS Antenna
• Hardwiring Cable
• 16GB MicroSD Card
• Windshield Mount
• Spare 3M Mounting Tapes
• Adhesive Cable Clips
• Quick Start Guide

High Definition Video Quality

Sony Exmor R Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.

The 135° wide angle lens view will minimize blind spots to assure recording of all events without fail.

The rear camera captures 720p footage with a 140° wide-angle lens.

Parking Surveillance Mode

Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.

Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality

Motion Detection

Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection

Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

Multiple Recording Modes

CONTINUOUS RECORDING MODE

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

INCIDENT RECORDING MODE

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

MANUAL RECORDING MODE

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

FAIL-SAFE RECORDING

In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

Wide Dynamic Range

Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.

Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.

Night-Time Quality Correction

Most videos recorded on a dashcam in the dark are generally difficult to make out details. That is why this dashcam uses enhanced sensors that come with a standard function of brightness and colour control as well as noise cancellation. These increase the quality of the image and ensure your videos are always the best quality possible.