JL Audio 10W3v3-2 500W 10" 25cm Subwoofer Bass Driver
JL Audio 10W3v3 JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Clearly the best sounding 10W3v3 's yet, these subwoofers feature DMA-optimize.
Regular Price
£399.00
Special Price
£359.10
W3v3 10-inch Subwoofer Driver (500 W, 2 Ω)
This acclaimed subwoofer driver strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
JL Audio 10W3v3 JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Clearly the best sounding 10W3v3 's yet, these subwoofers feature DMA-optimized, long linear excursion capability to minimize distortion and increase output. 10W3v3 's are superb performers in compact sealed or ported enclosures.
Multiple patented technologies enhance performance and reliability. As with JL Audio 's flagship drivers, development was guided by JL Audio 's proprietary DMA (Dynamic Motor Analysis) modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope.
A mineral-filled polypropylene upper cone body with a metallic JL Audio logo medallion provides a classy new look, while a removable (and customizable) mounting flange trim ring receives grille-mesh inserts directly, without the need for additional grille hardware. (Grille mesh inserts are sold separately.)
- RMS Watts - 500 W
- Recommended RMS Amplifier Power - 150 - 500 W
- Nominal Impedance - 2 Ω
- 10" subwoofer
- 2 Ohms
- Mineral-filled polypropylene cone
- Nitrile-butylene rubber surround
- Frequency response: 25-250 Hz
- Sensitivity: 84.87 dB
- Top-mount depth: 5-7/8"
- Sealed box volume: 0.625 cubic feet
- Ported box volume: 110025 cubic feet
- Nominal Diameter - 10.0 in / 250 mm
- Overall Diameter (A) - 10.5 in / 267 mm
- Mounting Hole Diameter (B) - 9.0625 in / 230 mm
- Bolt Hole Circle (C) - 9.7 in / 246.5 mm
- Magnet Diameter (D) - 5.25 in / 133 mm
- Mounting Depth (E) - 5.93 in / 151 mm
| type | N/A |
|---|---|
| manufacturer_part_number | N/A |