JL Audio 10W6v3-D4 600W 10" 25cm Subwoofer Bass Driver

W6v3 10-inch Subwoofer Driver (600 W, dual 4 Ω voice coils)

If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.

The 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space. Detailed enclosure recommendations can be found in the "Specifications" tab.

Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch subwoofer driver, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v2 as a 2 Ω or 8 Ω driver.

If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the JL Audio 10W6v3 is the ultimate choice. This advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.

The JL Audio 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 litre) of air space.

Greater excursion capability and higher power handling allow for higher output. Dual 4 ? voice coils permit deploying the W6v3 as a 2 ohm or 8 ohm driver.

• RMS Watts - 600 W
• Recommended RMS Amplifier Power - 200 - 600 W
• Nominal Impedance - Dual 4 Ω
• 10" subwoofer with dual 4-ohm voice coils
• Mineral-filled polypropylene cone with rubber surround
• Satin black cast-alloy basket
• Frequency response: 22-200 Hz
• Sensitivity: 82.7 dB
• Top-mount depth: 6-15/16"
• Sealed box volume: 0.55 cubic feet
• Ported box volume: 0.75 cubic feet

• Nominal Diameter - 10.0 in / 250 mm
• Overall Diameter (A) - 10.5 in / 267 mm
• Mounting Hole Diameter (B) - 9.02 in / 229 mm
• Bolt Hole Circle (C) - 9.86 in / 250 mm
• Magnet Diameter (D) - 6.3 in / 160 mm
• Mounting Depth (E) - 6.89 in / 175 mm