JL Audio XD500/3V2 - 3 Channel High Performance Speaker Subwoofer Amplifier
These technologies allow XDv2 amplifiers to achieve efficiencies exceeding 80%, meaning far less heat and strain on your vehicle's electrical system than a conventional large amplifier would generate. This efficiency advantage, combined with state-of-the-art microelectronic components, allows us to use very compact unitary cast alloy heat sinks. Just like their more expensive HD siblings, XDv2's deploy our Advanced Thermal Rollback System to completely eliminate annoying thermal shut-down events. The end result is outstanding audio performance and reliability in a compact amplifier that is easy to install in the tightest spaces.
£569.99
The amazingly small XDv2 amplifiers are huge in audio performance, thanks to our advanced NexD™ switching technologies.
3-Channel Class D System Amplifier, 75 W x 2 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V
This compact amplifier is ideal for a simple audiophile-grade, subwoofer / satellite system. With the XD500/3v2, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to your subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.
The XD500/3v2 includes a 12 dB / octave high-pass filter for its main channels, plus a variable slope low-pass filter for its subwoofer channel. Both filters offer continuously variable cutoff frequency selection from 50-500 Hz.
The XD500/3v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
These technologies allow XDv2 amplifiers to achieve efficiencies exceeding 80%, meaning far less heat and strain on your vehicle's electrical system than a conventional large amplifier would generate. This efficiency advantage, combined with state-of-the-art microelectronic components, allows us to use very compact unitary cast alloy heat sinks. Just like their more expensive HD siblings, XDv2's deploy our Advanced Thermal Rollback System to completely eliminate annoying thermal shut-down events. The end result is outstanding audio performance and reliability in a compact amplifier that is easy to install in the tightest spaces.
Beneath every XDv2's removable control cover, you will find studio-grade signal processing with fully variable crossover filters. Also included are our noise-killing, highly flexible differential-balanced inputs with remote level control capabilities via the HD-RLC remote level control (optional).
Some might just see a small amplifier, but for those who appreciate great audio, XDv2's reveal something huge.
- Three-Channel, Class D System Amplifier
- Inputs: Two Stereo Pairs (RCA-Type Jacks), Differential-Balanced Inputs
- On-board Crossover: Subwoofer Channel: 12 or 24dB/octave Low-Pass with continuously variable cutoff frequency selection from 50-500 Hz, defeatable
- Main Channels: 12dB/octave High-Pass with continuously variable cutoff frequency selection from 50-500 Hz, defeatable
- Speaker output connections: Accept up to 8 AWG wire
- +12V and Ground connections: Accept up to 4 AWG wire
- Subwoofer Channel: 180W RMS x 1 @ 4 ohms / 300W RMS x 1 @ 2 ohms
- Main Channels: 75W RMS x 2 @ 4 ohms / 100W RMS x 2 @ 2 ohms
- Bridged Main Channels: 150W RMS x 1 @ 8 ohms / 200W RMS x 1 @ 4 ohms
- THD at Rated Power: <1%
- S/N Ratio (Front & Rear Channels): >104 dB referred to rated power (A-weighted, 20 Hz-20 kHz noise bandwidth)
- S/N Ratio (Subwoofer Channel): >87 dB referred to 1W (A-weighted, 20 Hz-20 kHz noise bandwidth)
- Frequency Response (Front and Rear Channels): 12 Hz - 22 kHz (+0, -1dB)
- Frequency Response (Subwoofer Channel): 7 Hz - 500 Hz (+0, -1dB)
- Damping Factor (Subwoofer Channel): >120 @ 4 ohms per ch./ 50 Hz >60 @ 2 ohm per ch. / 50 Hz
- Input Range:100mV - 4V RMS
- Dimensions (L x W x H): 8.52 x 7.09 x 2.05 in. / 217 mm x 180 mm x 52 mm
| type | N/A |
|---|---|
| manufacturer_part_number | N/A |