JL Audio XD700/5v2 5 Channel Class D Full Range High End Speaker Subwoofer Amplifier

5-Channel Class D System Amplifier, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V

The XD700/5v2 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any vehicle. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.

The XD700/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.

The XD700/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Some might just see a small amplifier... But, for those who appreciate great audio, XD's reveal something huge.

• 200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
• NexD⢠Ultra-High Speed Class D
• Dimensions: 260 mm x 180 mm x 52 mm
• 5-channel car amplifer
• 75 watts RMS x 4 + 180 watts RMS x 1 (at 4 ohms)
• 100 watts RMS x 4 + 300 watts RMS x 1 (at 2 ohms)
• 200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
• variable low- and high-pass filters (50-500 Hz, 12 dB/octave, low-pass only on sub channel)
• optional wired remote for level control
• Class D amplifier design with NextD⢠switching amp technology
• differential-balanced inputs eliminate noise coming from your vehicle's electrical system
• Advanced Rollback Protection System prevents thermal shut-down
• speaker- and preamp-level inputs (speaker-level input requires an optional adapter)
• 260 mm x 180 mm x 52 mm